| LOGIN  | CATALOGS  | LINECARDS  | QUALITY  | NEWS  | ABOUT COMPAERO  | CONTACT US   |
PART NUMBER SEARCH  
OR COMPETITORS P/N  


 

INFORMATION FOR USE WITH COMPAERO CONNECTOR ACCESSORIES
The following Section pages contain dimensions, assembly guides, torque information, lanyard options and more for use with Compaero's line of Adapters, Backshells, Protective Covers, Cable Clamps, and other connector accessories.

 

SERIESDESCRIPTIONDRAWINGPDF

SECTION A

Build one now

CONNECTOR INTERFACE

Provides details on Connector Interfaces available, accessory thread information and dimensional data for the connector interface side of Compaero's adapters and backshells.

 

SECTION B

Build one now

MATERIAL AND FINISH

Provides information on the Materials and Finishes available on Compaero's Adapters, Backshells and other connector accessories.

 

SECTION C

Build one now

EMI/RFI TERMINATION ACCESSORIES

Information on Compaero's QPL'd line of AS85049/128 Termination bands as well as Memory Rings for use with Memory Ring Adapters and HellermannTyton Zetalok brand Constant Force Springs

 

SECTION D

Build one now

SHRINK BOOT KITTING OPTIONS

All Compaero Shrink Boot Adapters can be kitted with HellermannTyton shrink boots to reduce cost and save time during assembly.

 

SECTION E

Build one now

CABLE CLAMP OPTIONS

Compaero Backshells come with a selection of Cable Clamps depending on the application. These cable clamps are also available for purchase under MS3057A, MS3057B, MS3057C and MS3057D.

 

SECTION F

Build one now

LANYARD OPTIONS

Different lanyard options are available for Compaero's line of Protective Covers. This section can also be used for certain Adapters and Backshells including Series 34 (Shorting Caps).

 

SECTION G

Build one now

RECOMMENDED TORQUE VALUES

Recommended torque values for coupling rings, cable clamps and accessory hardware.

 

SECTION H

Build one now

COUPLING RING OPTIONS

Multiple coupling ring options are available on Compaero Adapters and Backshells including direct coupling, wrench flats, detent and non-detent self locking and more.

 

SECTION J

Build one now

ASSEMBLY AND INSTALLATION INFORMATION

This section contains recommended assembly instuctions, cable preparation and EMI/RFI Termination instructions for both Termination Bands and Constant Force Springs.

 

 

  © COPYRIGHT 2016 COMPAERO, INC. ALL RIGHTS RESERVED. - 379 TIMBER ROAD, MOORESVILLE NC 28115 USA - CAGE CODE: 0G3R1
  ALL INFORMATION ON THIS WEBSITE, INCLUDING ILLUSTRATIONS, SPECIFICATIONS, PRICING AND LEAD TIME IS BELIEVED TO BE RELIABLE. MISTAKES AND INACCURACIES, HOWEVER, MAY BE INADVERTANTLY PUBLISHED AND COMPAERO MAKES NO WARRANTIES AS TO THE ACCURACY OR COMPLETENESS OF THE INFORMATION, AND DISCLAIMS ANY LIABILITY REGARDING ITS USE. WEBSITE INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE. IN ADDITION, COMPAERO RESERVES THE RIGHT TO MAKE CHANGES — WITHOUT NOTIFICATION TO CUSTOMERS.

ABOUT SSL CERTIFICATES