SERIES | DESCRIPTION | DRAWING | PDF |
SERIES 30 Build one now | SHRINK BOOT ADAPTER Series 30 Shrink Boot Adapters are an economical way to transition from a connector to a cable using a heat shrink boot. These adapters provide full environmental sealing. | 
|  |
SERIES 31 Build one now | LAMP BASE THREAD EMI/RFI SHRINK BOOT ADAPTER Lamp Base Thread EMI/RFI Shrink Boot Adapter. This type of Shrink Boot Adapter is a simple way of adding a lipped shrink boot to a cable harness while providing EMI/RFI protection. Compare to Glenair Series 311-001, 311-002 and 311-039. | 
|  |
SERIES 34 Pricing / Availability | O-RING SEALED SHORTING CAP Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. A variety of lanyard options are available.
Compare to Glenair Series 340-001 and 340-002 | 
|  |
SERIES 35 Build one now | SHIELD SOCK SHRINK BOOT ADAPTER Shield Sock Shrink Boot Adapter. This type of Shrink Boot Adapter has a tinned copper shield pre-attached and packaged for immediate application. Compare to Glenair Series 319-001, 311-043 and 311-044. | 
|  |
SERIES 38 Pricing / Availability | EXTENDER BACKSHELL Extender Backshells provide extra room behind a connector and in front of a strain relief to allow for service loops, resistors, re-termination or other needs. The accessory threads and teeth of the connector are replicated on the back end of the Extender Backshell. Compaero to Glenair Series 320-001 and 320-002 | 
|  |
SERIES 40 Build one now | EMI/RFI ADAPTER EMI/RFI Single Band Termination Adapter. These adapters provide an economical approach to terminating overall cable and harness shields and screens. Compare to Glenair Series 440-073, 440-074 and 440-075. | 
|  |
SERIES 45 Build one now | TACOM STYLE EMI/RFI SHRINK BOOT ADAPTER EMI/RFI Single Band Termination Shrink Boot Adapter. These shrink boot adapters provide an economical approach to terminating overall cable and harness shields and screens while accepting a lipped shrink boot. Compare to TACOM Series 12347631, 12387120, 12387121, 12387118, 12387119 and 12387117. | 
|  |
SERIES 46 Build one now | EMI/RFI SHRINK BOOT ADAPTER EMI/RFI Single Band Termination Shrink Boot Adapter. These shrink boot adapters provide an economical approach to terminating overall cable and harness shields and screens while accepting a lipped shrink boot. Compare to Glenair Series 440-030, 440-031 and 440-069. | 
|  |
SERIES 49 Build one now | EMI/RFI MEMORY RING SHRINK BOOT ADAPTER Compaero Series 49 is for use with a Tinel-Lock Ring to provide EMI/RFI Protection. They also accept a lipped shrink boot to provide cable sealing and mechanical strain relief. Compare to Glenair Series 440-084, 440-085 and 440-086 as well as Tyco (Raychem) TXR Adapters. | 
|  |
SERIES 53 Pricing / Availability | DUMMY STOWAGE RECEPTACLE | 
|  |
SERIES 55 Build one now | NON ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell is suitable for an inside the box/climate controlled room
application where heavy cabling should be supported with adequate strain relief. Compare to Glenair Series 360-001 and 360-002. | 
|  |
SERIES 60 Build one now | ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell is suitable for fully environmental applications where heavy cabling should be supported with adequate strain relief. Compare to Glenair Series 370-001 and 370-002. | 
|  |
SERIES 61 Build one now | ENVIRONMENTAL BACKSHELL STYLE C OR E CLAMP This type of Backshell is suitable for moisture proof (water-tight) applications using a resilient grommet. Compare to Glenair Series 370-003 and 370-004. | 
|  |
SERIES 70 Build one now | EMI/RFI NON-ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in a non-environmental enclosure. Compare to Glenair Series 380-001 and 380-002. | 
|  |
SERIES 73 Pricing / Availability | EMI/RFI NON-ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in a non-environmental enclosure. | 
|  |
SERIES 80 Build one now | EMI/RFI ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in an environmentally protected enclosure. Compare to Glenair Series 390-001 and 390-002. | 
|  |
SERIES 81 Build one now | EMI/RFI ENVIRONMENTAL BACKSHELL STYLE C OR E CLAMP This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in an environmentally protected enclosure. Compare to Glenair Series 390-003 and 390-004. | 
|  |
SERIES 82 Build one now | EMI/RFI ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in an environmentally protected enclosure. Compare to Glenair Series 390-005 and 390-006. | 
|  |
SERIES 83 Build one now | EMI/RFI ENVIRONMENTAL BACKSHELL STYLE A OR H CLAMP This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in an environmentally protected enclosure. Compare to Glenair Series 390-007 and 390-008. | 
|  |
CPA32 & CPA33 Build one now | CPA32 (FOR PLUGS) & CPA33 (FOR RECEPTACLES) For use with MIL-DTL-38999 Series 3 Connectors. CPA32 will mate with D38999/26 Plugs CPA33 will mate with D38999/20 and D38999/24 Receptacles. | 
|  |
CPA42 & CPA43 Build one now | CPA42 (FOR PLUGS) & CPA43 (FOR RECEPTACLES) For use with MIL-DTL-5015 Connectors. CPA42 will mate with MS3106, MS3406 and MS3456 Plugs. CPA43 will mate with MS3100-MS3102, MS3400-MS3404 and MS3450-MS3454 Receptacles. | 
|  |
CPA80 & CPA81 Build one now | CPA80 (FOR PLUGS) & CPA81 (FOR RECEPTACLES) For use with MIL-DTL-26482 Connectors. CPA80 will mate with MS3116, MS3126, MS3475 and MS3476 Plugs CPA81 will mate with MS3110-MS3114, MS3120-MS3124 and MS3470-MS3474 Receptacles. | 
|  |
CPA123 & CPA124 Build one now | CPA123 (FOR PLUGS) & CPA124 (FOR RECEPTACLES) For use with AS95234 Reverse Bayonet connectors | 
|  |
CPA451 & CPA452 Build one now | CPA451 (FOR PLUGS) & CPA452 (FOR RECEPTACLES) For use with MIL-DTL-38999 Series IV connectors | 
|  |
CPA501 & CPA502 Build one now | CPA501 (FOR PLUGS) & CPA502 (FOR RECEPTACLES) For use with MIL-DTL-38999 Series I connectors | 
|  |
CPA510 & CPA511 Build one now | CPA510 (FOR PLUGS) & CPA511 (FOR RECEPTACLES) For use with MIL-DTL-38999 Series II connectors | 
|  |
CPA591 & CPA601 Build one now | CPA591 (FOR PLUGS) & CPA601 (FOR RECEPTACLES) For use with MIL-DTL-83723 Series III threaded connectors | 
|  |
CPA592 & CPA602 Build one now | CPA592 (FOR PLUGS) & CPA602 (FOR RECEPTACLES) For use with MIL-DTL-83723 Series III bayonet connectors | 
|  |